Retrieving Stored Readings; Recall The Records - GERATHERM active control+ GT-1115 Manual De Uso

How to operate the unit

Retrieving stored readings

1. In order to retrieve the latest read-
ings, press the "MEM" button and
release it. The display will show
the average value (AVG) of the
last three readings. (Note: If fewer
than three readings are available,
the latest reading is shown)
2. By pressing again on the "MEM"
button, all stored readings can be
retrieved. The number and date of
the stored reading can be seen in
the bottom left-hand corner. The
stored reading appears alternate-
ly with the time when the reading
was taken.
stored value
No. 1
month and day
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other
records are pushed back one digit (e.g., 2 becomes 3,
and so on), and the last record is dropped from the list.
SN
3. In order to retrieve the readings of
another user, select that user in ad-
vance. See section on "Selecting a
user".
To retrieve the stored readings,
press the "MEM" button and re-
lease it.
time
month and day
51
EN