Descaling - Krups XP3200 Manual De Instrucciones

IFU_KR_COFFEE_MAKER_XP3200_ 8000828507-01_Mise en page 1 13/09/10 16:55 Page1
n The presence of water is normal and is not the sign of a leak. If
necessary, clean the drip tray (m) and its grid (l) with water and a
little gentle washing-up liquid, rinse and dry.
n Make sure the drip tray is put back into place properly (fig. 18).
Caution! Do not put any of these parts into the dishwasher.

8. DESCALING

The warranty does not cover machines which have become faulty be-
cause descaling was not periodically performed. Descale your espresso
machine regularly using Krups descaling kits (model F054) available in
Krups authorized service centres (to Krupsonlinestore.ca for Canadian
residents only). In addition to two packets of descaling powder, the kit
also includes a water hardness tester to help you determine the proper
schedule for descaling your machine in normal use. The amount of scale
that develops depends on the hardness of the water used, but also the
level of use. The schedule indicated by the water hardness tester is a
general guideline only. Keep in mind that you may have to descale more
frequently than indicated.
Ave. number
coffees per
week
Less than 7
From 7 to 20
Over 20
If in doubt, it is recommended to descale every month.
D E S C A L I N G T H E M A C H I N E
n Empty the tank and replace.
n Follow the instructions for using the Krups descaling powder inside
the kit.
n Then insert the filter holder (without espresso grounds) and lock into
place by turning to the right.
n Place a container under the steam wand to catch the water.
DESCALING FREQUENCY
Soft water
(<19°th)
Once a year Every 8 months Every 6 months
Every 4 months Every 3 months Every 2 months
Every 3 months Every 2 months
Hard water Very hard water
(19-30°th) (>30°th)
Every month
English
15