Problems, Probable Causes And Corrective Actions - Krups XP3200 Manual De Instrucciones

IFU_KR_COFFEE_MAKER_XP3200_ 8000828507-01_Mise en page 1 13/09/10 16:38 Page1
9. PROBLEMS, PROBABLE CAUSES AND
CORRECTIVE ACTIONS
Problems
The espresso
is not hot
enough.
The coffee
flows too
slowly.
The water
does not run
through.
Water leaks
from the filter
holder after an
espresso has
been made.
Coffee
grounds in the
cup.
Possible causes
The cups and the
filter holder are
cold.
The ground coffee
is too fine, too oily
or floury.
The filter holder is
dirty.
The water drip-
through grid is
clogged.
No water in the
tank.
The tank is not
properly in place.
The filter is clogged.
The ground coffee
is too fine.
Your machine needs
to be descaled.
Your machine needs
to be descaled.
The filter holder is
clogged.
The espresso grind
is too fine.
Solutions
Preheat the accessories: cups and
filter holder.
Choose a larger grind of coffee.
The perfect espresso grind will feel
like fine grains that do not clump
when pressed together.
Clean your filter holder (see
Section 7).
When the machine has cooled,
clean the brewing head with a
clean damp cloth.
Fill the tank.
Replace the tank in the correct
position.
Clean the filter holder (see Section
7) and try a larger grind of coffee.
The perfect espresso grind will feel
like fine grains that do not clump
when pressed together.
Descale the machine (see Section 8).
Descale the machine
(see Section 8).
Clean the filter holder with hot
water. Shake to drain the water.
Choose a larger grind of coffee.
The perfect espresso grind will feel
like fine grains that do not clump
when pressed together.
English
17