Troubleshooting - Krups Pump espresso Manual De Instrucciones

PROBLEMS
The coffee is very moist.
The espresso flows too
slowly.
A continuous flow of water
pours from the filter holder
after making an espresso.
A continuous flow of water
pours from the filter holder
after making an espresso.
Coffee grounds are present
in the cup.
8

TROUBLESHOOTING

POSSIBLE CAUSES
You have not used enough
coffee.
The coffee is too fine, too
coarse or too mealy.
The filter holder is dirty.
The head of the filter holder
is clogged.
Your machine is calcified.
There is too much coffee.
Your machine is becoming
calcified because the water
is particularly hard.
The red cap was not
removed.
Your machine is becoming
calcified because the water
is particularly hard.
The filter holder is clogged.
The coffee grounds are too
fine.
The seal on the head of the
filter holder is clogged.
SOLUTIONS
Add more coffee.
Choose slightly larger
coffee grounds.
Clean your filter holder
using the instructions in the
section: CLEANING AND
MAINTENANCE - B. Filter
holder. Clean the coffee
filter as well.
When the appliance has
cooled, clean the grill
through which the water
flows using a damp sponge.
Descale your machine
following the user
instructions provided.
Observe the maximum
limits when filling the filter.
Descale your machine
immediately following the
user instructions provided.
Remove the red cap.
Descale your machine
immediately following the
user instructions provided.
Clean the filter holder using
hot water.
Use slightly larger coffee
grounds.
Clean the filter holder
and the seal with a damp
sponge.