Health O Meter Professional PRO PLUS 1100KL Operación Manual página 6

ASSEMBLY INSTRUCTIONS (2650KL & 2700KL)
Re er e
Insert the power cord into the retaining slot. Align the rear cover tabs with the
slots on the rear of the display assembly. Secure with 4 screws.
. ently tip the scale. Screw in 4 plastic feet. Do not tighten.
. ently return the scale to the upright position.
ARNIN : Do not drop the scale on its feet. This could result in load cell damage.
7. Screw unscrew the plastic feet to level the scale.
Figure 2
r Li ge 25
5
r e i r