First use
upon first use, or when it has not been used for some time,
the following operations must be carried out:
• Remove the water tank from the equipment (2).
Wash the tank carefully in water.
after washing, fill it with drinking water and refit
to the machine in the correct position.
• Check that the lever (5) is down.
Place a cup on the tray (7).
• Press the General Button (11) to position "ON".
The red light (12) will illuminate.
Wait for the green indicator to show (14) and then
press the extraction button (13) to start the flow
of water from the extraction nozzle (10).
Press the extraction button again (13) so that the
water stops running.
This operation is required to ensure that the
water heater is primed and the equipment
properly activated.
52