• Confirm that the water tank (2) has the recommended
water level for coffee preparation.
as required fill or top up the tank as indicated in the
paragraph "filling the water tank" (page 51).
• Press the General Button (11) to the "ON" position.
The red light (12) will illuminate indicating that the
heater unit is warming the water.
Water heating is activated automatically.
• Wait for the green light (14) to show which confirms
the correct operating temperature.
Preparing the drink
• Conduct a purge operation before starting the preparation
of any beverage.
Without inserting a capsule, press the extraction button (13)
to pump water through the system. Press the extraction
button again (13) to stop the purge operation.
The equipment is ready to start preparing your beverage.
NOTE: Carrying out the Purge operation on a regular basis
guarantees improved drink quality and assists with the
ongoing maintenance of the equipment.
• Press the opening lever of the capsule holder
housing unit (5) and raise it to its limit.
InstructIons for use
EN
53