Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
C15
C16
Drill a hole in the center of each outline.
Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
C18
C17
Attach the rails onto the screws.
Tighten screws.
C19
C20
Connect 4" duct and vent to the outside. Tape joints.
Route wires through the strain relief. For supply connection,
If ducting does not fit securely, an adapter may
use wires suitable for at least 90º C (194º F).
need to be purchased.
12
41951-01 12/01/2013
Publicidad
Tabla de contenido
