Prior Information; Sphere Of Application; Liability - SOMFY Tilt&Lift 25 RTS Manual De Instrucciones

EN

1. PRIOR INFORMATION

1.1. SPHERE OF APPLICATION

Tilt&li are designed to drive most types of interior roman blinds, venetian
blinds, pleated blinds and cellular blinds.
The installer, a home motorisation or home automation professional, must
ensure that once the driven product is installed, it respects the current standards
in the country of installation, notably standard EN 13120 relative to interior
blinds.

1.2. LIABILITY

Before installing and using the drive, please read these instructions carefully. In
addition to the instructions provided in this guide, please also comply with the
instructions set out in the enclosed Safety instructions document.
The drive must be installed by a home motorisation and automation professional,
in accordance with Somfy's instructions and the applicable regulations in the
country of installation.
Any operation of the drive outside the sphere of application described above is
prohibited. Such operation shall exclude Somfy from all liability and invalidate
the Somfy warranty, as will any failure to comply with the instructions given
herein and in the enclosed Safety instructions document.
A er installing the drive, the installer must inform his customers of the
operating and maintenance conditions for the drive and must pass the operating
and maintenance instructions on to them, as well as the enclosed Safety
instructions document. Any A er-Sales Service operation on the drive requires
intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional
information, consult a Somfy contact or visit www.somfy.com.
16 Copyright 2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
Tilt & Li 25 RTS