Use And Maintenance; Mode Selection: Roller Or Tilting Mode; Up, Down, My: In Roller Mode - SOMFY Tilt&Lift 25 RTS Manual De Instrucciones

Tilt & Li 25 RTS

3. USE AND MAINTENANCE

This motor is maintenance-free

3.1. MODE SELECTION: ROLLER OR TILTING MODE

The mode selection is only possible if step 2.3.4. Recording the RTS control
point has already been completed.
The Drive is designed to work with 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of blind you are
working with. The drive is set by default to work in Tilting mode.
1) Move the motorised product away from the end
limits.
2) Simultaneously press the Up and Down
buttons until the motorised product moves up
and down.
3) Press and hold the my and Down buttons
simultaneously until the motorised product
moves up and down to change from Roller
mode to Tilting mode.
To return to previous mode, repeat step 1.

3.2. UP, DOWN, MY: IN ROLLER MODE

1) To move the motorised product from a limit to
the other limit, press briefly the Up or Down
button.
2) To stop the motorised product, press the my
button.
3) If a my position is recorded,To move the
motorised product to this my position, press
briefly the my button.
Copyright 2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
1
2 3
1
2
3
EN
23