Chart Industries Caire Companion 21 Instrucciones De Operación página 16

Figure 6: Attaching a Nasal Cannula
3. Turn the Flow Control on the top of the Stationary unit to the setting
prescribed by your physician.
NOTE: Use only marked settings - oxygen will not flow if
the control is set between flow settings. Do not set the flow
above the flow rate prescribed by your physician.
If a humidifier is used, check for a steady stream of bubbles.
This indicates that oxygen is flowing.
4. The Stationary unit's Contents Indicator will show how much liquid
oxygen remains in the unit. This indicator should be checked
periodically to ensure the supply is adequate.
5. During use, moisture will condense on the internal parts of the unit. A
Moisture Collection Container is provided.
14
1 — Standard Cannula Position
(Front View)
2 — Standard Cannula Position
(Side View)
3 — Alternate Cannula Position
(Front View)