Publicidad
Idiomas disponibles
Idiomas disponibles
Conformity
Leister Process Technologies, Galileo-Strasse 10, CH-6056 Kaegiswi/Switzerland
confirms that this product, in the version as brought into circulation through us, fulfils
the requirements of the following EC directives.
Directives:
Harmonized Standards: EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1
Kaegiswil, 05.01.2010
Disposal
Power tools, accessories and packaging should be sorted for environmental-
friendly recycling. Only for EC countries: Do not dispose of power tools into
household waste! According to the European Directive 2002/96 on waste
electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected
and sent for recovery in an environmental-friendly manner.
16
2006/42, 2004/108, 2006/95
EN 55014-1, EN 55014-2, EN 61000-6-2
EN 61000-3-2, EN 61000-3-11 (Z
EN 50366, EN 62233, EN 60335-2-45
Bruno von Wyl
Technical Director
WARNING
Danger ! Unplug the tool before opening it as live
components and connections are exposed.
Incorrect use of the hot air tool can present a fire and
explosion hazard especially near combustible materials
and explosive gases.
Do not touch the element housing and hot wedge
when hot as they can cause burns. Allow the tool to
cool down. Do not point the hot air flow in the direction
of people or animals.
CAUTION
The voltage rating stated on the tool should correspond
120
to the mains voltage.
230
EN 61000-3-11; Z
consultate supply authority.
For personal protection, we strongly recommend the
FI
tool be connected to an RCCB (Residual Current Circuit
Breaker) before using it on construction sites.
The tool must be operated under supervision. The heat
can reach combustible materials which are out of sight.
Protect the tool from damp and wet.
)
max
Christiane Leister
Owner
= 0.060 Ω + j 0.038 Ω. If necessary,
max
Publicidad
