Pairing Light Switch With Fan; Pairing Your Bluetooth Device To The Speaker; Bluetooth ® Speaker And Fan Operation - HomeNetWerks 7130-06-BT Manual Del Usuario

BLUETOOTH SPEAKER FAN GRILLE INSTALLATION
2. Attach grille by pinching mounting springs and insert into
narrow rectangular slots in the fan housing.
Turn on power source.

PAIRING LIGHT SWITCH WITH FAN

This is a one-time pairing to be done after turning on the power source.
1. Turn switch to on ON. The white LED light on the fan should be on.
2. Cycle the switch ON & OFF multiple times (pause one second between each cycle) until the blue LED night
light on the fan is flashing.
3. While the blue LED night light is flashing, press LIGHT.
4. The blue LED night light will stop flashing and appear as solid blue. The switch is now paired with fan and
all four setting buttons on the switch should now be functional. If the blue LED night light stops flashing and
the white LED light is on the pairing was unsuccessful, repeat steps 2-4.
5. Any combination of settings can be achieved by individually pressing each setting button, except LED light
and night light.
EG: LIGHT and FAN will turn on the exhaust fan and LED light.
EG: LIGHT and MUSIC will turn on LED light and Bluetooth speaker.
Should you ever lose pairing between the switch and fan, repeat steps 2-4.
NOTE: If installing multiple units or you are having an issue pairing the switch to the fan.
A. Make sure all toggle switches are in the OFF position.
B. Cycle the first switch ON and OFF multiple times (pause one second between each cycle) until the blue LED
night light on the fan is flashing.
C. While the blue LED night light is flashing, press MUSIC. The blue LED night light will stop flashing (this will
prepare your fan to restart the pairing process).
D. Once pairing is successful, your pairing is now complete. IF YOU HAVE ANOTHER UNIT turn the fan off
and repeat steps A-C for any remaining fans.
PAIRING YOUR BLUETOOTH
1. To play your personal music files, you need a wireless BLUETOOTH
2. Set your device to a midrange volume before connecting to the speaker.
3. Follow the instructions that came with your BLUETOOTH
to search for other BLUETOOTH
Identification Number).
4. From the Home screen, choose Settings > BLUETOOTH
speaker.
Note: While your device can maintain multiple pairing records, it can only connect to one accessory
at a time. This prevents your device from sending your data to the wrong BLUETOOTH
5. Choose the Homewerks
6. When pairing is complete, you can use the BLUETOOTH
7. Optimal volume setting for the BLUETOOTH
may cause sound distortion.
DEVICE TO THE SPEAKER
®
accessories. This may involve entering a passkey or PIN (Personal
®
speaker, and then enter a passkey or PIN (0000) if prompted.
®
®
2
device to make it discoverable or to set it
®
, the device searches for Homewerks
®
speaker to play audio with your device.
®
speaker is 70% or lower. Settings higher than 70%
10
® device.
accessory.
®
®
www.homewerksww.com