Care And Maintenance - HomeNetWerks 7130-06-BT Manual Del Usuario

INSTALLING BATTERY INTO REMOTE CONTROL
1. Remove the two screws securing the battery
cover on the remote.
2. Slide out the battery cover. The battery cover
has a small rubber gasket, take care not to
lose this gasket.
3. Place the battery into the plastic prong on
the battery cover, printed side down and
slide the battery and battery cover back
into the remote.
4. Replace the screws.

CARE AND MAINTENANCE

See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140 degrees Fahrenheit.
• Do not immerse BLUETOOTH
Turn off power source. Review all safetyprecautions.
1. Remove grille by squeezing spring and pull down. Wipe clean
with damp cloth.
Caution: Do not immerse speaker into water.
www.homewerksww.com
speaker in water
®
11
1