Bt Mode - auna Northfork Manual De Instrucciones

EN
38
You may store your preferred FM stations to
the preset station memories. There are 20
memory presets in your radio. Presets are
remembered by your radio in the event of a
power failure.
The procedure for setting presets and using
them to tune stations is the same for DAB
modes:
In FM mode, select the desired wave band.
Press   to view the stored stations,
press or to tune to the required station as
previously described, and then press ENTER
to select the preset number under which
you will store the station. Press ENTER to
confirm.

BT MODE

You must follow several steps to connect your mobile phone:
1. Activate BT from your mobile phone (please refer to your phone's user
manual)
2. Press the POWER button to turn on the unit,
3. Rotate the SOURCE knob to select the BT mode It will be ready to pair
automatically.
4. Use your mobile phone to search for the BT device named "Auna
Northfork".
5. Your mobile phone will find "Auna Northfork" and will present the option
to connect or not. Please connect to it using the password "0000"
(if any). When you are successfully connected, the BT indicator "BT
connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together.
When the unit and phone have been paired once, they will automatically
connect when the unit is on and BT is activated on the phone. The next
time you power on, the unit will automatically connect to the most recently
connected mobile phone.
Play from BT Device
After successful BT connection, press the
 button to skip the tracks backwards or forwards. To pause or resume
play, press the  button again. Press and hold the button to disconnect BT.

Preset Store
<1:90.5MHz>
Preset 1
stored
 button to play. Press the  or
