CONVEYING ADJUSTMENT
On the rear of the stoves there are 2 ducts (*) for conveying hot air. Each duct can send hot air to an adjacent room via a KIT 8 on
each outlet, or they can both send hot air to the same adjacent room through a KIT 9 (using only one air grille).
In order to send the air to the ducts, you need to act on commands A and B on top of the stove. The right duct is controlled by
lever B on the right, while the left duct is controlled by lever A on the left.
NOTE: the levers A and B must be used with the provided thermal glove, since they get very hot.
There are various alternatives for ventilation.
100% conveyed
Left closed – Right closed
RIGHT
50% conveyed
Left open - Right closed
DIMENSIONS OF THE THREE MODELS
50% conveyed
0%
front grille
0% conveyed
50%
Left front panel
LEFT
*
- 16
-
LEFT
Left closed - Right open
Left open – Right open
*
50%
right front panel
100%
front grille