Assembling The Exterior Cabinet - Graf Klaro E Professional Instrucciones Para El Montaje

Exterior column for outdoor installation
2-10 PE
4.5

Assembling the exterior cabinet

The plastic column intended for outdoor installation should be sunk into the ground up to the mark on the
front of the cabinet. A ditch of a sufficient depth should be dug for this (see Figure on page 7). In order to
avoid overheating in summer, a site must be chosen in which the cabinet is not continuously exposed to
direct sunlight.
info@graf.info
www.graf.info
4. Assembly of the switch cabinet
20 / 45
845
300
900
Exterior cabinet for outdoor installation
A ditch with the following measurements should be
prepared at the planned site:
Exterior column
Length approx. 360 mm
Width approx. 360 mm
Depth approx. 600 - 640
mm
The empty pipe and the air hoses must be routed
into the prepared ditch.
585
12-18 PE
Exterior cabinet
Length approx. 585 mm
Width approx. 315 mm
Depth approx. 600 - 640
mm