Safety information
Do not store explosive
substances such as aerosol
containers with flammable
propellant gas in this appliance.
Do not submerge the
appliance in water or any
other liquid. Protect the power
cable, plug, and mains adaptor
from moisture.
Do not put your hand into
the appliance during
operation – this may lead to
injury! Make sure that the
appliance is never tilted more than
45°, as this could damage the
compressor.
After unpacking, leave the
appliance in its final
position for at least 2 hours. The
cooling agent inside the appliance
must first sink to the bottom, as
the compressor could otherwise be
damaged. The manufacturer will
assume no liability in the event of
incorrect assembly, improper or
incorrect use, or repairs carried
out by unauthorised third parties.
16
Warning: Risk of fire! The
cooling circuit contains the
cooling agent isobutane (R600a).
Although it is a natural, environ-
mentally-friendly gas, it is also
flammable. Make sure that the
cooling circuit is not damaged
during transport or while setting
up the appliance.
The cooling agent (R600a) is
flammable.
If the cooling circuit is damaged:
• Keep away from open flames and
ignition sources.
• Thoroughly ventilate the room in
which the appliance is located.
• Do not continue using the
appliance.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
• After unpacking the appliance,
check that it is in perfect
condition and has not sustained
any damage that could impair
its functional safety. Should
you notice any defects or if the
appliance has fallen on the floor,