Maintenance Works - Windsor Saber Compact 22 Manual De Instrucciones

Maintenance Works

Empty the waste container
Turn the waste container slightly in the
clock-wise direction and pull it out simul-
taneously.
Empty waste container.
Replace the waste container.
Turn or replace squeegee blades
Remove the squeegee tool.
Unscrew the star grips.
Remove the plastic parts.
Remove the squeegee blades.
Turn the squeegee blades or insert new
ones.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Empty the dirty water reservoir.
Move out the pedal to drive out the run-
ning gear towards the right and release it
upward.
Briefly press the handle downward so
that the chassis can drive out.
Press the brush change key and tilt the
cover on the brush head towards the si-
de.
Pull out the brush rollers.
Insert and lock into place the new brush
rollers.
Close the cover, align the brushes and
lock in the cover.
Drive in the running gear. Press the pe-
dal downward and lock it towards the left.
Replacing the disk brushes
Empty the dirty water reservoir.
Move out the pedal to drive out the run-
ning gear towards the right and release it
upward.
Briefly press the handle downward so
that the chassis can drive out.
Turn the button for the setting of the ad-
vance speed in "– " direction.
17
English