Before Commissioning; Installing The Brushes; Installing The Squeegee - Windsor Saber Compact 22 Manual De Instrucciones

1 Cover dirty water reservoir
2 Shut off float
3 Dirty water reservoir
4 Dust filter (suction)
5 Fresh water fill port
6 Screw for tank fastening
7 Dirty water discharge hose
8 Main fuse F1
9 Battery *
10 Battery socket
11 Pedal for driving forward the chassis
12 Knobs to exchange the squeegee blades
13 Vacuum hose
14 Squeegee tool *
15 Wing nuts for tilting the squeegee tool
16 Wing nuts for fastening the squeegee
tool
17 Info button
18 Display
19 Key switch
20 Metering switch on/off
21 Water quantity regulator
22 Emergency-stop button
23 Program selection switch
24 Overload display brush motor and inter-
ruption display
25 Battery control display
26 Traction switch on/off
27 Connection cable for charger
28 Squeegee tool lowering lever
29 Waste container (Saber Compact 22 SP)
30 Brush rollers (Saber Compact 22 SP)
31 Cleaning head
32 Key for brush rollers (Saber Compact 22
SP)
33 Cover for water supply
34 Filling level display and fresh water di-
scharge hose
35 Star grip pushing handle fastening
36 Detergent intake
37 Control handle
38 Push handle
39 Disk brushes (Saber Compact 22)
40 Splash guard
8
English
41 Button for advance speed
42 Pedal for changing brushes (Saber
Compact 22)
* not included in the delivery

Before Commissioning

Unloading
Release the star grips of the pushing
handle fastening.
Turn the pushing handle backwards and
tighten the star grips.
Place long lateral boards of the pak-
kaging as a ramp next to the pallet.
Fix the ramp on the pallet with nails.
Place short boards as a support under-
neath the ramp.
Remove the wooden bars in front of the
wheels.
Move out the pedal to drive out the run-
ning gear towards the right and release it
upward.
Briefly press the handle downward so
that the chassis can drive out.
Push down the machine through the
ramp from the pallet.

Installing the Brushes

The brushes must be installed before the in-
itial operation (see "Maintenance works").

Installing the Squeegee

Insert the squeegee tool into the squee-
gee suspension in such a manner that
the profiled sheet is positioned above the
suspension. Tighten the wing nuts.