ENGLISH
4
Important
Do not use the appliance if the plug, the cord or the appliance itself
is damaged.
Preparing the appliance for use
1
Before you connect the appliance, check whether the mains voltage
indicated on the appliance corresponds to the mains voltage in
your home.
2
Place the appliance on a horizontal surface.
Do not put the appliance on a hot surface.
Keep the appliance out of the reach of children and make sure that
they are unable to pull at the cord.
C
3
Put the plug in an earthed wall socket.
You can store excess cord at the back of the appliance.
Prevent the cord from coming into contact with hot surfaces.
C
4
Fill the water tank with water and put the jug in place.
C
5
Switch the appliance on by pressing the button.
The pilot light goes on.
Let the appliance run until the water tank is completely empty.
C
6
Switch the appliance off after use.
Let the appliance cool down for at least 3 minutes before you start
brewing coffee.