Setting up your dishwasher
Control panel
The Control Panel section has instructions for the DW60R2014US and the DW60R201AP.
Instructions for the DW60R2014US start below. Instructions for the DW60R2014AP start
on page 14.
DW60R2014US
01 POWER
02 Cycles
03 Half Load
04 Delay Start
05 Display
Window
06 Sanitize
12
English
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 12
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers off
automatically.
To select a wash cycle, press this button.
For small amount of loading items, press the Half Load button to
save energy.
Delay a cycle for up to 24 hours in one-hour increments. The hour
displayed indicates the time at which the wash will be started.
Displays the running time, Delay start hours, and information codes.
If a problem occurs during operation, a check message will be
displayed with a warning sound.
The temperature rises to 163 ˚F (73 ˚C) in the final rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the "Sanitize" lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the "Sanitize" lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certified.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential dishwashers. Certified residential
dishwashers are not intended for licensed food establishments.
• Only sanitizing cycles have been designed to meet the
requirements of 6 for soil removal and sanitization efficacy. There
is no intention, either directly or indirectly, that all cycles on a
certified machine have passed the sanitization performance test.
2019-02-12
11:45:21