Wiseup WIFI34 Guia Del Usuario página 14

DC5V 2.0A power adapter and USB cable included during the video recording process.
Q5: Even though I keep the camera charged, the WIFI signal still drops?
A5: Make sure that you use our DC5V 2.0A power adapter provided to charge the
camera. If the power adapter is lower than DC5V 2.0A, say, DC5V 1.0A, the camera's
WIFI signal will be unstable and keep dropping. Plus, we don't recommend you connect
the camera directly to your PC computer for charging, because the current output will not
be enough for the camera to run normally.
Q6: The camera is not holding my Wifi settings and continues to show that the
camera is offline?
A6: Make sure the camera is inside the range of good WIFI signal. Or if you are using the
backup battery, check if the power adapter is connected properly for long time use.
Q7: Will the camera still work if the power goes out?
A7: If the camera is in P2P (LAN) mode, the camera can still work and record video as
long as the backup battery provides power for the camera to run. If the camera is in WAN
mode, it will not work until power is restored and the Internet access is available.
Q8: How to add the camera to more devices?
A8: Make sure that camera is in WAN mode already. Then launch the "Camwf" APP on your
other Android devices, tap "+" icon, scan the QR code on the back of the camera for camera's
UID and password. Or input the camera UID (a unique combination of numbers and letters
specific to your camera) and password. Finally, tap "OK" to add the camera to the APP.
Q9: What to do if I forget my password?
A9: You will have to reset the device to factory settings (See VIII) and re-add the camera.
Q10: The camera does not record any video to the Micro SD card?
A10: Power off the camera, take out the Micro SD card, format the SD card, then insert it
to the SD card slot to try again.