Wiseup WIFI34 Guia Del Usuario página 6

How to check if remote view function works?
1. Exit the "Camwf" APP.
2. Back to the WIFI setting page on your phone or mobile device, exit your phone or
mobile device from the current WIFI network, enroll your phone or mobile device in
another WIFI hotspot, or you can turn off the WIFI function, enable your mobile network
data instead.
3. Make sure your smartphone or tablet PC has Internet access and launch the "Camwf"
APP again. If the camera shows "Online" on the home page, it means the remote view
setup is complete and the camera has entered into WAN mode. Now you can view live or
recorded video remotely from any location.
[Note]:
When the camera tinkles twice, it means the WIFI configuration is successful. If the camera
shows "Connect Fail" on the page and beeps twice, it means the WIFI configuration is failed and the
camera will go back to P2P mode automatically in 1 minute; you need to set up all over again.