Klarfit Highflyer FX2 Manual De Instrucciones página 27

Function frame
4
Attach the function frame to the upper and lower
U-shaped tube with two M8 * 40 screws.
Massage belt
First unscrew the three M8 * 16 screws under
the massager device (including washers and
5
spring washers). Then place the head of the
massager device on the function frame and
retighten the 3 screws.
For devices with 6-stage shock absorption system:
Remove the fuse by loosening the two screws
6
with the hex wrench.
Insert the decorative rubber cover into the
7
threaded hole just exposed.
EN
27