Spare Parts; Recycling - Nederman Exhaust Rail System 920 Manual De Usuario

EN Exhaust Rail System 920/1500
guide ways if necessary.
8. Check the rubber buffer and the schock absorber of the suction trolley.
9. The nozzle.
10.
Check that there is enough suction power in the exhaust hose.
11.
The operation of the balancer. Make sure that the hose lifts up properly.
If necessary, adjust the lifting power of the balancer, see Figure 4.
12.
The cord on the balancer.
13.
Check the disconnection operation on systems with automatic
disconnection. If necessary, adjust the bowden wire on the suction
trolley.
14. Check the tightness of the screws in the joint connectors.
5.1

Spare parts

Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
•
Part number and control number (see the product identification plate).
•
Detail number and name of the spare part (see www.nederman.com).
•
Quantity of the parts required.
6

Recycling

The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.
14