Publicidad
3.
Drill pilot holes using a 5.5 mm (7/32 in.) diameter drill bit. Remove wall plate template.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.).
15
4.
Install the wall plate
wall plate.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
movement of the wall plate
3
16
using lag bolt
and washers
15
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
75 mm (3 in.)
(7/32 in.)
14
18
. Tighten the lag bolts and washers only until they are pulled firmly against the
4
5.5 mm
16
MUST BE firmly tightened to prevent unwanted
15
16
18
9
Publicidad
