Preparing For Your Treatment - Philips Respironics I-neb AAD Guia Del Usuario

The latch (C) on the medication chamber
8
will be directly across from the sensor port
cover (E) (see the picture below).
To place the mouthpiece on the I-neb, line
9
up the vent hole with the back of the I-neb
body. Move it forward to click it into place.
Make sure it is firmly in place. There should
be no gaps. To remove the mouthpiece
after treatments, hold the top of the
mouthpiece and roll it forward or rock it
from side to side to pull it off.
8
12035_RRDD_InebPH_InstESUS_1056844_Issue1_v10.indd 10
Located inside the mouthpiece is a flap valve.
The position of the valve is important to
normal operation of the I-neb. Look at the flap
valve before use. Make sure it is not twisted.
If it is twisted, place the valve under running
water to correct the position.
C
Caution
E
If the flap valve is twisted, the I-neb may not be
able to detect your breathing and medication
may not be delivered.
3.5 Preparing for your treatment
Select the correct medication chamber for
10
your dose of medication. Your healthcare
provider will tell you which dose to take.
Look at the chamber information table in
section 7.1. It will help you choose the right
chamber. Attach the medication chamber
by pushing it on the I-neb and twisting it in
a clockwise direction (to the right).
Caution
Make sure the color of the disc matches the
color of the chamber latch.
Before you start
18/02/2010 12:23