OxyGo NEXT Manual Del Usuario página 24

6. A. While holding the button open,
slide the column assembly out of the
device by pulling on the column pull
handle or
B. Insert tool and press down
between latch and columns.
7. A. Remove the columns completely
from the OxyGo NEXT. Both columns
are removed as one piece or
B. Rotate tool up to push columns out.
8. A. Column (metal tube) Installation:
Remove dust caps of new column
assembly. Make sure there is no dust
or debris where the dust caps were
located or
B. Remove dust caps of new column
assembly. Make sure to keep the
top cap as it is also a tool for column
removal.
21
6A
6B
7A
7B
8A 8B