9.
A/B. Insert column assembly into the
OxyGo NEXT concentrator. Do not leave
the column ends exposed; column
assembly should be inserted into the
OxyGo NEXT as soon as the dust caps
have been removed.
10. Push the column assembly into the
device such that the columns are
fully seated into the OxyGo NEXT
concentrator. The spring loaded latch
button should fully return to the closed
position.
11. Connect the AC power supply cord to
the OxyGo NEXT and plug the power
supply AC cord into an electrical outlet.
Do Not Power on the OxyGo NEXT
concentrator.
The following steps can be done by
pressing specific buttons on the device's
screen or within My OxyGo App.
Steps from your device's display:
º
Press and hold the plus (+) and (-)
minus button for 5 seconds. The
screen will display the following
informational icon. Release button
once icon is displayed on screen.
º
Press the alert
screen will display the following
informational icons.
º
Press the power
turn on the OxyGo NEXT, and use
normally.
Steps using My OxyGo App.
º
If you are using My OxyGo App,
navigate to the Advanced screen,
then to Additional Information
screen and click on the Column
Reset button.
button once and
button to
9A
9B
Closed and locked
10
(Actual appearance may vary,
depending on model with or
without pull handle.)
22