Adding/Deleting Rts Sensors; Creating Multiple Or Group Controls - SOMFY Universal Slim Receiver RTS Plug Guia De Instalacion

Installation guide

5.2 Adding/Deleting RTS sensors

Caution: a maximum of 3 RTS sensors may be
programmed into an RTS Slim Receiver.
1) Press the PROG button on the programmed
control point (a) until the awning makes an up
and down movement: the RTS Slim Receiver is
in its programming mode for 2 minutes.
2) Briefly press the PROG button on the RTS sensor
(d) to be added/deleted: the awning makes an up
and down movement: the RTS sensor (d) has
been added/deleted.

5.3 Creating multiple or group controls

5.3.1 Group control
Group control: an RTS control point controls several
RTS Slim Receiver units.
1) Switch off the power supply to the RTS Slim
Receiver (connected to the motorised awnings: e,
f and g for example) to be controlled from a single
control point.
2) Switch on the power supply to the first RTS
Slim Receiver to be linked to the control point:
the awning (e) makes a brief up and down
movement.
3) Press the Up and Down buttons on the RTS
control point at the same time: the awning makes
another brief up and down movement.
4) Press the PROG button on the RTS control point
until the awning (e) makes another brief up and
down movement: the RTS control point has been
programmed.
5) Switch on the power supply to another RTS Slim
Receiver to be linked and repeat steps 3) and 4).
6) Repeat the procedure for each of the other RTS
Slim Receiver units to be added to this control
point.
Copyright © 2007 Somfy SAS. All rights reserved.
U_S_R_5054294X00_livre.indb 43
RTS Universal Slim Receiver - RTS Plug Universal Slim Receiver
1
PROG.
a
d
1
PROG.
a
1
OFF
2
ON
4
PROG.
d
2
PROG.
d
2 Min.
d
2
PROG.
d
2 Min.
e f g
3
e e
e
e
20/05/08 11:16:55
43