Instructions And Warnings For The End User - Allmatic SER-UNI 170 Manual De Instrucciones

EN

7 - INSTRUCTIONS AND WARNINGS FOR THE END USER

Allmatic S.r.l. produces systems for the automation of gates, garage
doors, automatic doors, rolling doors, parking lots and road barriers.
However, Allmatic is not the manufacturer of your automation, which
is rather the result of a process of analysis, evaluation, selection
of materials, and installation performed by your own installer. Each
automation is unique and only your installer has the experience and
professionalism required to create an installation to suit your needs,
safe and reliable over time, and carried out according to the good
industry practice, i.e. compliant with the current regulations. Even if
your automation meets the security level required by law, this does
not exclude the existence of "residual risks", i.e. the possibility that
it may cause dangerous situations, usually as a result of improper
or irresponsible use; for this reason we would like to give you some
suggestions:
Before using the automation for the first time, ask the installer to
explain the origin of residual risks.
Keep this manual for future use and deliver it to any new owner of
the automation.
Inappropriate or improper use of the automation can make it dan-
gerous: do not command the movement of the automation if people,
animals or things are in its range.
Children: If properly designed, an automation ensures a high de-
gree of security, preventing movement in the presence of people or
things with its detection systems, and ensuring always predictable
and safe activation. It is prudent to prevent children from playing
near the automation and keep remote controls out of their reach to
prevent accidental activation.
Malfunctions: As soon as you notice any malfunctions, disconnect
the installation from the power supply and operate the manual re-
lease. Do not attempt any repairs by yourself, but require the assis-
tance of your installer: meanwhile, the installation can operate like
a non-automated opening device after releasing the motor with the
release key supplied with the system.
In case of failures or power failures: while awaiting the arrival of
your installer or the restore of the electricity, if the installation is not
equipped with backup batteries, the automation can be operated as
any normal non-automated opening device. To do this, you must run
the manual release.
Release and manual movement: before performing this operation
pay attention that the device can be released only when the door
is stationary.
16
Maintenance: Like any machine, your automation needs periodic
maintenance to ensure its long life and total safety. Agree with your
installer on a maintenance plan on a periodic basis; Allmatic recom-
mends a frequency of 6 months for normal domestic use, but this
period may vary depending on the intensity of use. All inspection,
maintenance or repairs should be performed only by qualified per-
sonnel;
Do not change the installation and control or programming param-
eters of the automation: the responsibility lies with your installer;
The testing, routine maintenance and any repairs must be docu-
mented by the person who performs them, and related documents
must be kept by the owner;
The only interventions that are possible for the user and should be
carried out periodically are the cleaning of the covers of the photo-
cells, as well as the removal of any leaves or rocks that could block
the automation. To prevent anyone from activating the gate or door,
before proceeding, remember to release the automation and clean
only with a cloth slightly dampened with water;
Disposal: At the end of the automation life, make sure that the dis-
mantling is carried out by qualified personnel and the materials are
recycled or disposed of according to local regulations in force;
Operate the gate or door (with remote control, key switch, etc..); if
everything is working properly, the gate or the door will open and
close normally, otherwise the flashing light flashes and the manoeu-
vre does not start;
With the safety devices out of use, the automation must be repaired
as soon as possible;
Replacing the remote control battery: if your remote control seems
to work worse or not work at all after a while, this may simply de-
pend on the exhaustion of the battery (depending on use, it may
take several months to over a year). In that case, you will see that
the confirmation of transmission light does not turn on, or comes on
only briefly;
The batteries contain polluting substances: do not throw them in the
garbage but use the methods prescribed by local regulations.
Thank you for choosing Allmatic; for more information feel free to
visit our website www.allmatic.com.
6-1624009 rev.03