Honeywell QUIETCLEAN HHT-215 Manual De Instrucciones página 3

HHT-215_HHT-217_OM.qxd
OPERATION
• Press the power (
• The LCD screen will display Medium (
• To change air cleaning power setting, press the up (
( ) buttons (Fig. 2). The display will indicate the current setting:
Low ( ), Medium (
• For maximum cleaning power, set the unit to operate at the High
( ) setting. For quieter settings, or during sleep, set the unit to
Medium ( ) or Low (
• To turn the unit off, touch the Power (
Timer Operation
Once the air purifier is turned on, you can program it to turn off
automatically after a set amount of time.
• Press the Timer button (
"8" (Fig. 3).
• Press the timer plus (
hours (1 to 18). The selected number will flash for a few seconds – once it stops flashing, the air purifier is in
Timer mode and will automatically shut off after the specified amount of time.
(Example: If you want the unit to turn off in 6 hours, touch the
Timer button, then press the timer minus (
number "6" is displayed.)
• To turn the Timer mode off, press the Timer button twice.
NOTE: Removing the IFD
cancel the Timer function.
DUAL UV LAMP OPERATION
• Press the UV button (
• The Lamps will light and you will see a faint blue glow along the
front of the unit above the grille.
• The display will say "UV" in the bottom row.
NOTE: Removing the IFD
cancel the UV Lamp function.
10/20/06 5:02 PM
) button to turn the air purifier on (Fig. 1).
).
), High ( ).
).
) button.
) – the LCD screen flashes the number
) or timer minus ( ) buttons to increase or decrease the desired number of
) button until the
™ filter assembly or turning the unit off will
) to turn the Lamps on or off (Fig. 4).
™
filter assembly or turning the unit off will
Page 3
Fig. 1
) or down
Fig. 2
Fig. 3
Fig. 4
3