Publicidad
Idiomas disponibles
Idiomas disponibles
5. Highlight [Start] and press the ENTER button.
The Auto 3D Reform feature has been executed. Processing takes about
20 seconds
* To cancel, use the SELECT
press the ENTER button.
NOTE:
* When "4:3 Fill" is selected in "Aspect", the Auto 3D Reform feature is not available.
* If the screen's outer frame is larger than gray area of the guide pattern as shown, the
Auto 3D Reform feature does not function.
* In the Auto 3D Reform mode, when controlling the projector using PC control, you
might not be able to make correction. (The projector can be operated with Dynamic
Image Utility 2.0, Image Express Utility 1.0 and HTTP Server function.)
Setting Screen of Auto 3D Reform
1. Press the MENU button.
The Basic menu is displayed.
* When the Advanced menu is displayed, go to Step 3.
2. Use the SELECT
the ENTER button.
The Advanced menu is displayed.
3. Use the SELECT
Press the SELECT
4. Use the SELECT
Press the SELECT
Focus ........................... See page E-47 of the user's manual.
Wall Color Correction .. See page E-47 of the user's manual.
3D Reform ................... Clear a check mark from the check box to dis-
Adjustment
Inside .................... Corrects so that an image is projected in-
Outside ................. Corrects so that an image is projected out-
Sensitivity ............. If the built-in sensor sensitivity is so strong
NOTE: If you failed to correct for placing the image inside of the screen using [Inside], the
projector automatically corrects to project the image larger than the outer frame of the screen.
or
button to highlight [Cancel] and
or
button to highlight "To Advanced Menu" and press
or
button to highlight "Projector Options".
button. The "3D Reform" option is highlighted.
or
button to highlight "Auto Functions".
button. The "Auto Functions" screen is displayed.
able the Auto 3D Reform.
side of the screen outline.
side of the screen outline.
that it recognizes even lines within the
screen, select "Lower". If the built-in sensor
sensitivity is too weak to recognize the
screen, select "Higher".
E2
Not recommended
Publicidad
