Operation - Festo DGCI Instrucciones De Utilizacion

DGCI-...
3. Tighten the locking nut K of the stop bolt or shock absorber with the following
tightening torque.
DGCI-...
Tightening torque
Fig. 24
7

Operation

Warning
Uncontrolled fast moving parts can cause
injury to people in the vicinity of the DGCI.
S Make sure that:
– nobody can place his/her hand in the path
of the moving parts (e.g. by providing a
protective grill)
– there are no objects within the positioning
path.
It should not be possible to touch the
DGCI until the mass has come to a
complete stand.
If the work stroke is modified:
S
make sure that the work stroke remains within the permitted limits:
( Commissioning under "Accurate adjustment of the stroke").
If the work load or dynamics are modified:
S
check whether other cushioning elements are required on the SPC200/CMAX
( Commissioning the DGCI or
Festo DGCI-...-Z6 1207b English
18 25
[Nm] 5 20
Manuals for the controller).
32 40
20 35
Fig. 25
63
60
39