GPO PR50 Manual Del Usuario página 12

Bluetooth Mode
The PR50's Bluetooth mode allows you to stream your vinyl to any
Bluetooth enabled speaker or headphones.
1. Turn on the unit power
2. Select Bluetooth mode by pressing Bluetooth mode button
3. The Bluetooth indicator light will flash rapidly as the unit searches
for nearby Bluetooth-enabled devices
4. When paired the blue light will flash shortly with a two second
interval
5. If the devices fail to sync, please repeat points 1-4
6. Use the volume controls to set the desired sound levels
7. Hold down the stop button under USB mode for three seconds to
turn off Bluetooth mode
Please note: When pairing the PR50 to your Bluetooth speaker or
headphones, please ensure that the device you wish to stream vinyl to
is set to pairing mode. This will allow them to sync.
Vinyl Record Mode
1. Insert a blank USB stick into the slot
2. Place the desired vinyl onto the turntable and begin playing
3. Press the record button on the control panel, the red light will begin
to flash. Press the record button once to record the vinyl in one
track, press the record button twice to split the tracks
4. Press the stop button to turn off recording
RCA Audio Out
An RCA cable is included with your GPO PR50. You will require this
cable to connect to extra speakers.
12