Step 14, Start Icemaker; Step 15, Install Toekick; Step 16, Door Alignment - GE Profile PSB42LGRWV Instrucciones De Instalación

14 START ICEMAKER
Green Power Light
• Flip the switch to I (ON). The icemaker will begin
operation automatically.
• Make sure nothing interferes with the sweep of the
feeler arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, set the switch to O (OFF).
15 INSTALL TOEKICK
• Locate the supplied toekick (shipped taped to the top
of the refrigerator). Install with 2 screws provided.
• A custom toekick (not supplied) can be installed to
match or complement the surrounding cabinets. Use
the supplied toekick as a template to cut the shape.
Supplied Toekick
1/4" or Thicker Toekick
Installation Instructions
Power Switch
Feeler Arm
16 DOOR ALIGNMENT
• Stand back from the refrigerator to inspect the door
alignment.
• Shipping or the addition of heavy door panels may
have caused the doors to move slightly out of
alignment.
• If necessary, the Fresh Food door may be adjusted
up or down to align with the Freezer door.
• Loosen the nut on hinge pin.
• Use a 7/32" wrench to adjust the hinge pin as
shown.
• Tighten the nut on the hinge pin.
20
Bushing
g e
D o o r H i n
g e
C a s e H i n
7/32" Wrench
Raise
Clockwise