Oreck VersaVac Manual De Uso Y Mantenimiento página 3

Assembly
1. Align the connector tab at the bottom of the Oreck VersaVac
handle with the receiving port on top of the unit. Insert until
!
a "snap" is heard.
2. Up-Position Lock - Place foot on power head and lean handle
back gently to release lock for use. Return handle to the full
upright position to engage lock.
3. Cord Release - To remove cord, twist cord release 1/2 turn.
Slide cord off cord handle.
4. Easy Power Cord Storage - Turn cord release to the up
position, wrap power cord around cord release and lower
cord bracket located below the carry handle.
5. Carry Handle - Carry handle is located on the back of the
appliance for easy lifting, carrying, and use on stairs.
6. Microfiber Steam Mop Pad Holder
A. To attach the Oreck VersaVac's microfiber steam mop
pad holder, lower the power head onto the microfiber steam
mop pad holder.
B. To remove the Oreck VersaVac's microfiber steam mop
pad holder, place foot on release pedal and lift the Oreck
VersaVac ™ appliance away from the microfiber steam mop
pad holder.
Operating the Oreck Vacuum
NOTE: Remove steam mop pad holder when vacuuming.
7. Turn the function selector dial to "VACUUM" for hard surface
floors, such as vinyl, wood or tile.
8. Turn the function selector dial all the way to the right for
the suction and brushroll functions.
9. To empty the debris cup grasp the cup handle, press the
release button and lift out.
10. Press the release button on the front of the cup to open and
empty.
11. Replace the debris cup. NOTE: Do not operate the vacuum
without debris cup in place.
OPERATION
UNLOCK
LOCK
™
1
5
STEAM STEAM BRUSH
ON READY ON
Release
Button
3
2
7 8
STEAM STEAM BRUSH
ON READY ON
10
3
4
9
6
STEAM STEAM BRUSH
ON READY ON