Troubleshooting
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE
General
If ejected copies are not flat or are stacked
unevenly, turn over the paper in the
cassette and reload it.
If copies are curled, refer to Curled Output
on page 1-29.
If a paper jam occurs, check the side guide
located in the cassette is adjusted to the
size of paper loaded.
Clearing Paper Jams
Leave the main power switched ON ( | )
while performing the procedure to clear
paper jams.
Open the cover of the copier and turn the
fixer knob (A1) to the left at least 20 times
before carrying out the paper jam removal
procedure.
Once the jam is cleared, the operation panel
on your copier will return to the status and
settings prior to the jam.
English
1-19