Reset Switch; Warranty - Novag PERFECT CHESS 2ROBOT Instrucciones

VERIFICATION:
Place one chess piece each on the outmost squares for black rook, white rook, black king and
white king.
Press the SOUND key until you see VerCB in the LCD display
Press GO to verify the calibration.
If you are not satisfied with your calibration you can press the toggle key SOUND again until you see
"P1:xx yy" and proceed with the calibration as described above.
EXIT: To end the calibration mode, please press the CLEAR button.
ARM MOVEMENT ENABLE/DISABLE
The 2Robot arm movement can be enabled or disabled by the toggling the TakeBack key to "Robot
=" or "Robot ".
THE ARM GETS STUCK
The LCD will display "ErrArn". Press Clear key to reset the arm error and re-do the last move.

RESET SWITCH

If you cannot get your computer to work, check first the power supply carefully or use the Reset
Switch on the back of the Chess Computer to erase the entire computer Memory. Use a pointed
instrument (e.g. paperclip) to poke into this hole. Hold it for 3 seconds. The Memory has now been
reset and you may continue normally. Please use the RESET facility only in case of need.

WARRANTY

For details please refer to the enclosed Warranty Card.
A8 B8 C8 D8
A7 B7 C7 D7
A6 B6 C6 D6
A5 B5 C5 D5
A4 B4 C4 D4
A3 B3 C3 D3
A2 B2 C2 D2
E8 F8 G8
E7 F7 G7
E6 F6 G6
E5 F5 G5
E4 F4 G4
E3 F3 G3
E2 F2 G2
17