b. For installation with ISOFIX
(ISOFIX attachments and top tether)
1. Fit the ISOFIX attachments guides
with the ISOFIX attachments anchor
points. The ISOFIX attachments
guides can protect the surface of
the vehicle seat from being torn.
They can also guide the ISOFIX
attachments connectors.
27
2. Extend the ISOFIX attachment
connectors by activating the release
button
28
whilst pulling on the
connector
29
19
27
28
29
!
Make sure that both ISOFIX
attachments connectors are
securely attached to
their ISOFIX attachments anchor
points. The colors of the indicators
on both ISOFIX attachments
connectors should be completely
green.
30
!
The ISOFIX attachments
connectors must be attached and
locked onto the ISOFIX attachments
anchor points.
!
Check to make sure the child
restraint is securely installed by
pulling on the both ISOFIX
attachments connectors.
!
Select the desired recline position
before moving back against the
vehicle seat, as once the top tether
is attached and tensioned, the
recline angle will not be able to
change without adjustment to the
top tether.
ecurely installed by p
3. Press the ISOFIX attachments
release button and push the child
restraint back against the vehicle
seat until tight.
31
4. To extend Top Tether for use, press
button on Tether Adjuster and pull
to lengthen.
32
30
1
31
32
2
1
20