Aqua Medic Ocean Light Manual De Instrucciones página 9

Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
4. Installation
The light is either mounted with the steel wire suspension aquafit 3 (not included in shipment) on
the ceiling or with the included fittings at the aquarium.
4.1. Mounting of ceiling suspension (not included in shipment):
The wire suspension system aquafit 3 provides a neat and simple method of ceiling mounting of
Ocean Light LED.
The suspension system consists of the following (2 pcs. each):
1. Ceiling plate incl. screws and plugs, 2 metres of stainless steel incl. stopper
2. Lamp fixing (cable with Y-piece, with end sleeves)
First of all, both the ceiling plates (1.1) have to be mounted to the ceiling securely by using screws
and plugs. The nuts for mounting the Y-steel cable are movable mounted on top of the light (Fig. 1,
No. 1). They should be located as far as possible at the outer edge.
Pict. 1: Ocean Light LED with steel wire suspension (1) and connection socket for control
unit (2).
9