Identification And After-Sales Service; Identification And Servicing; Technical Specifications - Grillo 2500 Manual De Instrucciones

AFTER-SALES SERVICE
This handbook provides instructions for use of the motor hoe and for correct basic servicing which the
user can carry out himself. For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number of the machine and the code number or the part to be
replaced when ordering. For engine parts, refer to the specific handbook.
WARRANTY
The warranty is given in compliance with the current law. The dealer will have to give the client a copy of
the registration card of the machine, which they will print up from the Grillo website.
guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced. Contact your
local dealer. For further information, our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail:
ENGINES
- ROBIN EX17 169 cm³, 5HP (@ 3600 r.p.m.), one-cylinder petrol.
- HONDA GX160 OHV 163 cm³, 4,8HP (@ 3600 r.p.m.), one-cylinder petrol.
- KOHLER 3000 196 cm³, 5,5HP (@ 3600 r.p.m.), one-cylinder petrol.
STARTER: recoil starter.
FUEL TANK: 3,1 Litres (GX160) – 3,6 (EX17- 3000).
TRANSMISSION: with gears in oil bath.
GEARBOX: two forward gears.
PTO:
1) one direct PTO running at the engine r.p.m. in anti-clockwise rotation (11UNI 221)
2) one synchronized P.T.O with gearbox speeds in clockwise rotation (13 UNI 221).
CLUTCH: conic and active.
HANDLEBAR: height- and side adjustable.
WORKING AREA WIDTH WITHOUT SIDE DISCS: adjustable at 580-850 mm(with enlargement kit).
ROTARY TILLER RPM: I 53 r.p.m.; II 123 r.p.m.
ATTACHMENTS: furrower, wheel extensions, rubber wheels, transfer wheel, plough.
WEIGHT: kg 72 (with GX160) - kg 75 (with 3000) - kg 74 (with EX17)
Translation of the original instructions

IDENTIFICATION AND AFTER-SALES SERVICE

grillo@grillospa.it

TECHNICAL SPECIFICATIONS 2500

The rotavator is fitted with a nameplate on the
frame with the serial number of the machine. This
number must be stated when requesting service or
ordering spare parts.
7
For the engine the