Installation Guide - Ergomotion Serta Motion Essentials Manual Del Propietário

installation guide

Always use two people when setting up the base, moving or flipping the base.
STEP 1
Place the bed base box in a desired location with the bottom of
the box facing up .
Remove the binding straps and packing materials, making sure
not to puncture the box with any sharp objects .
STEP 2
Remove the bed base from the box keeping the bottom of
the base facing upwards .
STEP 3
To install headboard brackets (sold separately)
see instructions on page 14 and 15
To install the legs, thread the washer over the screw on the leg .
Next, screw the leg into the nutsert on the frame . Do not over
tighten .
The 3-in-1 legs untwist into separate sections for custom leg
height options (3", 6", or 9")
For customer support, visit www .ergomotion .com or call: 1-888-550-3746
8
STEP 4
To sync two bases with the sync cord - see page 13
Locate the battery backup strap
Store the battery backup strap in a convenient
location for emergency use.
For operating instructions, see owner's
manual.
STEP 5
Uncoil input cord (connected to control box's
power port) and plug into Power Supply .
STEP 6
Uncoil the Power Cord and connect to the
Power Supply . Place Power Supply on the
ground and extend from the base . Ensure
that the Power Supply and all attached
cords are directed toward the desired
surge protector .