installation guide
STEP 7
Carefully flip the base over onto its legs.
Important: Always use two people when setting up, moving or
flipping the base. Do not drag across the floor. Do not rest frame on
its side, excessive pressure may damage the legs .
STEP 8
WARNING
Always unplug the base from the electrical outlet before servicing any
part of the base. To reduce risk of electric shock, unplug the base before
cleaning. To safely disconnect, ensure the base is in a flat position with all
motors off, and unplug from power source.
Plug the base into a power source . A surge protector is
strongly recommended .
For customer support, visit www .ergomotion .com or call: 1-888-550-3746
STEP 9
Ensure batteries are correctly installed in the
back of the remote .
Quickly test functions to verify proper setup
before placing mattress on base . Press FLAT
to return the base to a flat position.
STEP 10
Insert each end of the mattress retainer bar into the holes at
the foot of the base . Make sure the bar is secured .
Setup is now complete! Test all functions on remote .
9