Schlage L9000 Manual Del Usuario página 2

3
Install springs and spindles
All functions
4
Install OUTSIDE indicator trim
Steps 4a – 4d for INDICATOR TRIM ONLY
FOR NON-INDICATOR OUTSIDE TRIM, SKIP TO STEP 5
4a For emergency turn or cylinder indicator trim ONLY:
Adjust the cam spindle length.
Cut the spindle at the appropriate mark
according to door thickness.
For 2Z\v" door do not cut the spindle.
4b Assemble the escutcheon mounting plate, indicator slide
and cam as shown.
Coin turn cam
Cylinder or
emergency
turn cam
Exterior
Cam
OR
Indicator
Escutcheon
mounting plate
4c Connect the cam to the indicator slide. The cam must
engage either the left or right side of the indicator slide
according to door handing.
• Unlock the door.
• Move the indicator slide against the top rim of the
mounting plate (unlocked position).
• Assemble the cam as shown.
Lock Type
Non-deadbolt
functions
Deadbolt
functions
4d Place the escutcheon faceplate on the indicator
assembly.
slide
OUTSIDE INDICATOR
Door Hand
RH/RR LH/LR
LH/LR RH/RR
Escutcheon
faceplate
Indicator slide in
unlocked position
2