Fein Slugger JMC USA 9 Serie Instrucciones De Uso página 13

OBJ_BUCH-0000000276-001.book Page 13 Monday, July 31, 2017 1:42 PM
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the adapter and ratchet (figure 3).
For adjustment of the drill spindle, mount the adapter and the ratchet on the right or left side.
Fig. 3
The drill spindle can also be adjusted from either side using a T-handle hex wrench or a hex
key (figure 4).
Fig. 4
1.
3.
2.
1.
3/8"
1.
4.
8 mm
1.
2.
T-handle hex wrench
3.
2.
Adapter
1.
1.
3.
2.
Hex key
en
13
Ratchet
8 mm