XYZ Printing PartPro200xTCS Manual Del Usuario página 11

Function Operation and Instructions
C1 Ink Change Ink
1. Tap Change Ink and tap to
confirm.
1 2
4 5
Tap the ink, the screen will
show the status of the ink,
including "Ink Low", "No Ink",
"Invalid Ink", and "Invalid Color"
2. Confirm the operation.
3
6
3.Wait until the cartridge moves
to the center of the print bed,
and then change the ink.
Cartridge Installation
1. Lift up the plate upwards.
2. Take out the cartridge.
3. Put in a new cartridge.
4. Check if the cartridge is placed properly.
5. Press down the plate on top.
6. Check if the order of the ink color is K(Black),
C(Cyan), M(Magenta) and Y(Yellow) from left
to right.
Note : Replacement of any ink cartridge, please
conduct inkjet calibration test.
4. Tap the PROCEED after you
change.
P11 P11