Dishwasher Control Section; Dishwasher Feedback Section; Canceling A Cycle - KENMORE ELITE 722.1435 Serie Manual De Uso Y Cuidado

Delay Hours
Use this option to run the dishwasher during off-peak hours. Contact your local utility provider to determine off-peak
hours.
Delaying the Start Time
1. Select a wash cycle and options.
2. Press Delay Hours to choose the number of hours to be delayed.
NOTE: The delay time can be set from 1 to 12 hours, in one-hour increments.
Cycle Indicators and Time Display
Selecting Cycles and Options
Select the cycle and options that best fit the load by referring to the Cycles and Options charts.
Turning OFF/ON the Button and End of Cycle Chimes
Press and hold Mixed Load and Sani Rinse at the same time for three seconds to toggle sound On and Off.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
2. Press and hold Start for three seconds. The drain pump activates and the cycle cancels.
3. Once the dishwasher finishes draining, the power turns off.
NOTE: If the dishwasher is powered on and no cycle is selected for four minutes, the dishwasher powers off.

Dishwasher Control Section

Dishwasher Feedback Section

The indicators glow when the dishwasher is washing, drying, sanitizing, and at cycle
completion. They also glow when the the delay option is selected.
The Status Display is used to follow the progress of the dishwasher cycle and to show other
information. Estimated cycle time is displayed in hours and minutes as you make cycle and
option selections.
After you start the dishwasher, the display counts down the time.
When you select the Delay Hours option, the time display shows the delay time.
The indicators display
indicator, press Pot & Pans button for three seconds.
The RINSE AID indicator illuminates when the rinse aid level is low. The LED automatically
shuts off when the rinse aid is refilled or the level is set to 0. Refer to the Rinse Aid
Dispenser Adjustment section.
If the Sani Rinse option is added to a cycle, the SANITIZED indicator stays lit at the end of
the cycle if the dishes were properly sanitized.
When the appliance is connected to the internet through a home Wi-Fi network, this icon
illuminates.
The Condensation Guard indicator illuminates when the Condensation Guard option is
selected.

Canceling a Cycle

and flash every 30 cycles. To activate or deactivate the
21