Klippan WEGO Manual De Instrucciones página 19

Rear-facing child seats, belt-seats, belt-cushions or baby protectors
must not be placed in the front seat unless the airbag is deactivated first.
Any Child less than 140cm in height should not travel in the front seat if
the airbag is active.
The seat can be used only with approved 3P belts! Your child seat can be
fitted safely on almost all the seats in the car with existing seat belts.
However, on some car seats the belts are fitted so far forward that proper
installation is not possible. If this is the case, try another car seat.
The seat can be mounted to the Isofix system of the vehicle, according to
a separate vehicle list.
1. Lift the isofix adjuster-handle
2. Pull out the Isofix connectors. Fasten the connectors onto the
Isofix hooks. Lift up the isofix adjuster handle, and push the seat
against the backrest of your vehicle.
The seat can be reclined into two different positions. In some vehicles,
you may need to adjust the recline-angle before you mount the seat in
your vehicle.
To adjust the car seat to the size of the child, gently press the head section
down. Now press the size adjustment button on the top of the backrest
and keep it pressed while moving the head section into the required
position.
Now it can be continuously adjusted to the right size and is locked into the
current position when the adjustment button is released.
4
5-6-7
8-9
10
11
19